Key Difference 1: We faithfully administer FX & FORMA treatments by applying a precise amount of energy.

InMode FX is used for fat reduction, and FORMA is used for collagen lifting. Both treatments have a set maximum output range, making it crucial to deliver sufficient treatment time and energy to achieve the desired improvement.

At our clinic, we maintain the device operation time for FX treatment for over 6 minutes, and for FORMA treatment, we adhere to an energy value of 10K or more.

Our medical team performs precise treatments based on the actual energy input of the device, not on a self-set timer.

At our clinic, all treatments are personally administered by our medical staff. This is to enhance treatment safety and ensure more meticulous care.

Key Difference 2: Our Know-How in Rapidly Reaching Target Temperature for Fat Reduction during FX Treatment

Fat reduction in FX treatment is only stimulated when the treated area reaches a certain temperature or higher.

We use methods that quickly raise and maintain the temperature of the treated area while minimizing pain.

To achieve this, we meticulously adjust various factors such as output, suction pressure, treatment speed, sequence, and the patient's skin reaction during the procedure.

- We utilize the device's output to its maximum potential. This enhances energy delivery, contributing to a rapid increase in temperature.

- We apply a longer pulse duration. This increases the time energy is injected through the tip during a single radiofrequency delivery, helping the treated area's temperature rise more efficiently.

- We also check the treatment area temperature with the back of our hand. In addition to the InMode device's real-time temperature measurement function, our medical staff directly and delicately checks the patient's treatment area temperature with the back of their hand to minimize discomfort.

- We adjust the treatment movement speed for each area. Initially, the treatment ensures heat is evenly delivered across the entire skin, then we concentrate on areas with more fat or those of concern to raise the temperature. This allows for effective treatment results while reducing the burden of pain.

Key Difference 3: Minimizing Cheek Hollowing and Delicate Adjustment Through Thorough Treatment Design

Since FX treatment selectively removes fat, a meticulous area design process is essential before the procedure.

Therefore, proceeding with treatment without a plan can lead to unwanted cheek hollowing. For this reason, we conduct thorough consultations with our medical staff and carefully design the areas for facial asymmetry improvement or specific concerns before starting the procedure.

We meticulously analyze each patient's face shape and fat distribution to help achieve natural and harmonious improvements.

Key Difference 4: Transparent Process Disclosure by Verifying Exact Quantities After Treatment

After the treatment, we directly show patients that the actual treatment time and energy input were accurately applied. This process aims to enhance the precision of the treatment and build patient trust.

InMode Treatments Performed at Our Clinic

*Radiofrequency (RF) lifting treatments are broadly classified into two main methods.

1. Monopolar Method

This method generates radiofrequency energy from one electrode, which is then recovered through a pad attached to the body.

While the energy is delivered to deep skin tissues, causing strong deep heat action, some irritation may be felt during the treatment.

2. Bipolar Method

The bipolar method involves energy moving between two electrodes, primarily focusing its action on the skin's surface and dermal layers.

This treatment is known to have less pain and is relatively safe, but it is comparatively difficult to deliver energy to deeper areas like the fat layer.

*Is there a special reason why InMode FX, despite being a bipolar method, works on the fat layer?

As explained earlier, the bipolar method generally finds it difficult to deliver energy deep into the fat layer.

Nevertheless, InMode FX possesses a unique structure that allows it to effectively act on the fat layer despite using a bipolar method.

The core of this function is the vacuum suction capability.

This function gently suctions the skin in the treatment area, stably positioning the skin and subcutaneous fat layers between the two electrodes.

Then, when radiofrequency energy is delivered, heat can effectively penetrate deep into the skin, including the fat layer, despite it being a bipolar method.

When treatment is carried out in this manner, it can induce damage to fat cells through temperatures between 42~45 degrees Celsius.

Damaged fat cells are naturally expelled from the body through lymphatic circulation, and at the same time, the dermis can experience the effect of new collagen production being stimulated.

As a result, you can expect the dual effects of fat reduction and improved skin elasticity simultaneously.

*Expected Effects of InMode FX

1. Fat Cell Breakdown

If a consistent temperature of 42~45 degrees Celsius or higher is maintained for at least 6 minutes, the cell membranes of fat cells can be damaged by heat.

Subsequently, the contents of the damaged fat cells can exit the body and be naturally expelled through the lymphatic system.

This procedure focuses on reducing fat cells. Therefore, it can be considered for areas with a large amount of fat, such as facial cheeks or a double chin.

2. Guide to Collagen Regeneration

Along with the fat breakdown process, thermal energy applied to the dermis layer of the skin activates fibroblasts. This induces the generation of new collagen.

Thermal stimulation causes existing collagen fibers to contract, which may create a lifting effect immediately after the procedure.

*Characteristics of InMode FORMA Procedure

FORMA is a radiofrequency (RF) procedure that primarily targets the dermal layer of the skin, rather than the fat layer.

The treatment device moves along the skin surface, delivering heat at levels of 42-43 degrees Celsius to the dermis.

This temperature stimulates fibroblasts in the dermis, aiding collagen production and potentially contributing to the improvement of fine lines, pore changes, and reduced skin elasticity.

One of FORMA's features is its real-time temperature feedback system. This allows for maintaining a stable temperature on the skin throughout the entire procedure.

In other words, it can promote collagen production with consistent heat while avoiding unnecessary overheating of the skin.

You may experience a tightening sensation immediately after the procedure, and collagen undergoes a gradual regeneration process over approximately 2 to 6 weeks.

*FX and FORMA: Which procedure is best for which area?

Sagging or fat accumulation issues in different areas of the face can have various causes.

-Double Chin

A double chin can mainly appear when excessive subcutaneous fat accumulates under the jaw or when the muscles under the chin weaken.

The FX procedure can help reduce fat cells by delivering radiofrequency heat to the fat layer in the double chin area. Additionally, collagen regeneration is induced, which can contribute to tightening the skin under the chin.

If the skin is thin or shows significant loss of elasticity, combining FORMA as a complementary treatment may be suitable.

-Cheeks below the cheekbones (Jowls)

As we age, the downward sagging of cheek fat is one of the signs of mid-face aging. The FX procedure can help reduce unnecessary fat, and

by combining FORMA to add elasticity, you can expect a more improved facial contour.

-Cheek and Side Cheek Areas

Enlarged pores, fine lines, and rough skin texture are primarily phenomena that occur when the collagen density in the dermis decreases.

The FORMA procedure uses thermal energy to stimulate fibroblasts, inducing collagen and elastin production. This can help restore the density and texture of the skin surface.

-Jawline

When a distinct jawline becomes blurred, it is often due to decreased skin elasticity rather than fat. In such cases, FORMA can focus on the dermis to induce collagen contraction and regeneration.

If necessary, combining it with the FX procedure can contribute to refining the facial contour more clearly.

-Around the Eyes, Forehead, and Mouth

The areas around the eyes, forehead, and mouth tend to develop fine lines easily, and the skin there can be thin and react sensitively.

FORMA can achieve sufficient results even at low output, making it suitable for consideration in these sensitive areas.

*Important Considerations When Considering InMode Procedures

The success of an InMode procedure cannot be judged simply by the presence or absence of the equipment.

The key lies in the combination of handpieces used, the depth of heat delivery, the total accumulated energy, and the establishment of a treatment plan tailored to each individual's skin condition.

For example, in the case of a procedure using the FORMA handpiece,

simply warming the skin surface may not effectively stimulate collagen production.

In fact, a temperature of approximately 42-43 degrees Celsius must be consistently maintained within the dermis for at least 10 minutes.

And accumulated energy of 8-12kJ or more per specific area must be reached for fibroblasts to be sufficiently stimulated to begin collagen production.

The same applies to the FX procedure. Rather than simply delivering radiofrequency energy, a combination of vacuum suction and thermal energy must work together.

When deep heat of 42 degrees Celsius or more is properly delivered for at least 6 minutes, fat breakdown and collagen contraction can be simultaneously induced.

Depending on the treatment area, it may be necessary to apply 8-15kJ or more of energy. Furthermore, for areas with thin skin or those prone to bruising, vacuum pressure must be finely adjusted to minimize side effects.

Additionally, a method that first focuses on managing the fat layer with the FX procedure, followed by a finishing lift with FORMA, may be even more effective.

After the procedure, it helps to control any swelling or heat that may remain on the skin, while simultaneously helping to refine the overall lifting contour.

In summary,

When choosing InMode treatment, it's advisable to consider that rather than the device itself, the medical professional's anatomical understanding, their ability to adjust treatment settings, and their skill in customizing the design for each individual can be crucial factors.

Our medical team performs treatments to achieve satisfying lifting results and continuously conducts research based on these standards.

Even with the same InMode treatment, we strive to provide a more delicate and suitable treatment for our visiting patients.

Treatment Process

Phase 1: FX Mode utilizes high-energy radiofrequency and IRE (electrical stimulation) technology. This method helps with overall facial lifting from the epidermal layer to the SMAS layer. Through this process, it can help reduce unnecessary fat and induce collagen production to refine the facial contour.

Phase 2: FORMA Mode delivers thermal energy to the dermal layer to stimulate collagen production. Through this, it can positively impact the improvement of fine wrinkles and enhance skin elasticity.

All procedures are performed directly by our medical professionals.