Male Laser Hair Removal

Precise Male Hair Removal Designed with GentleMax Pro Plus

Precisely planned hair removal can lead to more satisfying results.

Sometimes, even after multiple laser hair removal sessions, satisfactory results are not achieved.

This may be because the treatment was performed with the same settings, without considering individual hair characteristics and skin condition.

Laser hair removal uses thermal energy that reacts with the melanin pigment in hair to damage hair follicles. However, hair thickness, color, density, and skin tone vary from person to person. Therefore, if a uniform energy setting is used for treatment, the hair removal effect may be insufficient, and unnecessary skin irritation may occur.

In particular, male hair tends to be thicker and denser than female hair, with deeper hair roots. Beards, especially, are an area with fast growth and strong regenerative power due to hormonal influences. For these reasons, the choice of equipment output and treatment plan significantly impacts the results of male hair removal.

We precisely analyze the patient's condition.

We meticulously examine hair volume, thickness, color, density, and even skin tone. Based on this, we apply customized energy settings suitable for the skin condition and hair characteristics of each area.

We Create a Treatment Plan Optimized for Each Individual

Wavelength Selection: 755nm / 1064nm Dual Wavelength

The GentleMax Pro Plus utilizes two wavelengths, Alexandrite (755nm) and Nd:YAG (1064nm), in a single system.

• The 755nm wavelength has a high melanin absorption rate, making it useful for general body hair removal.

• The 1064nm wavelength penetrates deep into the skin, making it suitable for deeply rooted hair like beards or for darker skin tones.

Pulse Duration (Pulse Duration)

Generally, longer pulses are recommended for thicker hair. Thicker hair has a higher melanin content, and irradiating energy with short pulses can lead to rapid heat absorption, risking epidermal damage. Conversely, using longer pulses allows heat to be delivered gradually, protecting the epidermis during treatment.

Energy Density (J/cm²)

If hair is thick, higher energy density is required. This is because thicker hair has a large amount of melanin and a thicker hair structure, so sufficient thermal energy must reach the hair root to expect effective results.

Examples of Treatment Design by Area and Condition

1. Thick, dark hair like beards: High melanin content means it absorbs laser energy well. We combine sufficient energy with effective cooling to reduce skin irritation and perform safe treatments.

2. Fine or light-colored hair: As it has low melanin content, we adjust the energy appropriately or use repeated treatments to effectively deliver heat to the hair roots.

3. Areas with dense hair, such as legs or chest: To prevent skin overheating, we distribute energy carefully and proceed with treatment cautiously.

4. Darker or tanned skin: Since melanin is present in the skin itself, we select the 1064nm wavelength and finely adjust the output to reduce the risk of side effects.

We Meticulously Record and Analyze the Treatment Process

During hair removal treatment, we meticulously observe the hair condition, skin reaction, and changes in residual hair density for each area in every session. Based on this, we precisely readjust the output intensity, wavelength type, cooling time, and other parameters.

For example, in the first session, strong energy is used focusing on thick hair, and as sessions progress, the energy is finely adjusted to target remaining fine hairs. If necessary, the wavelength may also be switched from 755nm to 1064nm. In this way, we plan treatments not with the same method every time, but by adapting to changing skin and hair conditions.

Over time, the condition of the skin and hair changes. Therefore, hair removal treatments must also flexibly adapt to these changes.

Precisely Planned Male Hair Removal Process

1. Customized laser settings for each area

2. Real-time energy adjustment while observing skin reaction

3. Tracking and managing previous treatment history and progress

4. Setting goals for each session and proposing a customized treatment plan

5. Hair removal design considering skin tone, pore condition, and skin texture

We aim for hair removal treatments that go beyond simply removing hair, by understanding and helping to improve skin condition. You can experience a delicately designed hair removal process.

Reasons to Choose GentleMax Pro Plus

High energy is needed to effectively treat thick, deep male hair. GentleMax Pro Plus is equipped with a sophisticated cooling system to safely use such high output.

When removing thick hair, sufficient energy must be irradiated. However, as energy increases, the thermal burden on the skin's epidermis also increases. Using high output with equipment lacking an adequate cooling system can increase the risk of side effects such as burns.

GentleMax Pro Plus employs a gas cooling method called DCD (Dynamic Cooling Device). Immediately before the laser is irradiated, a cooling gas is sprayed onto the epidermis, effectively lowering skin temperature instantaneously. This is known to be more advantageous for protecting the skin's epidermis than air-cooling methods that use wind. Thanks to this, it can help reduce pain or irritation during treatment while using the necessary energy even for thick and deep hairs.

Furthermore, equipped with 755nm/1064nm dual wavelengths, the ability to change the wavelength to suit hair thickness, depth, and skin tone for treatment design is one of the key features of GentleMax Pro Plus.

Benefits of Treatment

Just before the laser is emitted, the DCD cooling system activates to minimize discomfort during the procedure.

Even thick and deep male hair can be effectively treated with appropriate energy.

Utilizing dual wavelengths of 755nm and 1064nm, treatment plans can be customized for various skin tones and hair types.

It can help smooth your skin texture while removing unwanted hair.

Who might be a good candidate for this procedure

Those who find daily morning shaving bothersome or irritating to their skin

Those who experience discomfort due to excessive hair growth

Those who wish to reduce concerns about pain during hair removal

Those seeking long-lasting hair removal results

Procedure Guide — Facial Area (including beard)

1. Personalized consultation and photo documentation for skin condition assessment

2. Treatment area design and main procedure

3. After the final session, re-photographing to confirm changes

4. Review results with the medical team, comparing before and after photos.

Procedure Guide — Other Areas

1. Personalized consultation

2. Main procedure

3. Confirm the condition of the treated area with the medical team.

Pre-Procedure Instructions

• You must shave the treatment area before your appointment. Shorter hair length can enhance the effectiveness of the procedure.

• For male beard hair removal, we recommend shaving just before the procedure.

• For a smooth procedure, it is recommended to wear clothing that easily exposes the treatment area. For example, you may wear a sleeveless top for arm and underarm treatments, or shorts for leg treatments.

After the procedure, the medical team will visually inspect the treated area with a mirror to ensure everything is satisfactory,

and provide explanations so that patients can fully understand and be satisfied with their treatment results.

Frequently Asked Questions

Q. How many sessions are typically needed for male laser hair removal?

This varies depending on the treatment area and hair condition. Generally, considering the hair growth cycle, we recommend 5 or more sessions at intervals of 3-4 weeks. Areas with thick and strong hair growth, such as beards, may require additional sessions.

Q. How much pain is involved in beard hair removal?

The degree of pain can vary from person to person. GentleMax Pro Plus utilizes a DCD cooling system to spray a cooling gas just before the laser light is emitted, helping to reduce discomfort during the procedure. If you are sensitive to pain, it is advisable to inform the medical team in advance during your consultation.

Q. Is hair removal possible even if my skin is tanned or I have a dark skin tone?

Yes, it is possible. By utilizing the 1064nm wavelength, which has a relatively low absorption rate for melanin pigment in the epidermis, individuals with darker skin tones can also consider the procedure while minimizing the possibility of side effects. However, if you have recently tanned, please be sure to inform the medical team during your pre-procedure consultation.

Q. What is the appropriate interval for hair removal treatments?

We recommend receiving treatments at intervals of typically 3-4 weeks, aligned with the hair growth cycle. As the number of sessions increases, we can assess the condition of the remaining hair and adjust the next treatment cycle or laser settings accordingly.